 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NL17SZ07 Single Non-Inverting Buffer with Open Drain Output The NL17SZ07 is a high performance single inverter with open drain outputs operating from a 1.65 to 5.5 V supply. The Output stage is open drain with Over Voltage Tolerance. This allows the NL17SZ07 to be used to interface 5.0 V circuits to circuits of any voltage between 0 and +7.0 V. http://onsemi.com MARKING DIAGRAM * * * * * * * * * * Tiny SOT-353 and SOT-553 Packages Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V Designed for 1.65 V to 5.5 V VCC Operation, CMOS Compatible Over Voltage Tolerant Inputs VIN may be Between 0 and 7.0 V for VCC Between 0.5 and 5.4 V TTL Compatible - Interface Capability with 5.0 V TTL Logic with VCC = 2.7 V to 3.6 V LVCMOS Compatible 24 mA Output Sink Capability, Pullup may be between 0 and 7.0 V Near Zero Static Supply Current Substantially Reduces System Power Requirements Chip Complexity: FET = 20 Pb-Free Packages are Available SC-88A / SOT-353 / SC-70 DF SUFFIX CASE 419A L7 M G G M SOT-553 XV5 SUFFIX CASE 463B L7 M G L7 M G G = Device Code = Date Code* = Pb-Free Package NC 1 OVT 5 VCC (Note: Microdot may be in either location) *Date Code orientation and/or position may vary depending upon manufacturing location. IN A 2 Pin PIN ASSIGNMENT Function NC IN A GND OUT Y VCC 1 2 3 GND 3 4 OUT Y Figure 1. Pinout 4 5 IN A 1 OUT Y L H FUNCTION TABLE A Input Y Output L Z Figure 2. Logic Symbol ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. (c) Semiconductor Components Industries, LLC, 2006 March, 2006 - Rev. 7 1 Publication Order Number: NL17SZ07/D NL17SZ07 MAXIMUM RATINGS Symbol VCC VI VO IIK IOK IO ICC IGND TSTG PD qJA TL TJ ILatch-Up MSL FR ESD DC Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Sink Current DC Supply Current per Supply Pin DC Ground Current per Ground Pin Storage Temperature Range Power Dissipation in Still Air Thermal Resistance Lead Temperature, 1 mm from Case for 10 Seconds Junction Temperature Under Bias Latch-Up Performance Moisture Sensitivity Flammability Rating ESD Classification Oxygen Index: 28 to 34 Human Body Model (Note 3) Machine Model (Note 4) Charged Device Model (Note 5) Above VCC and Below GND at 85C (Note 5) SOT-353 SOT-553 SOT-353 SOT-553 Output in Z or LOW State (Note 1) VI < GND VO < GND Characteristics Value *0.5 to )7.0 *0.5 VI )7.0 *0.5 VO 7.0 *50 *50 $50 $100 $100 *65 to )150 186 135 350 496 260 )150 $500 Level 1 UL 94 V-0 @ 0.125 in Class IC Class A N/A Unit V V V mA mA mA mA mA C mW C/W C C mA Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. IO absolute maximum rating must be observed. 2. Tested to EIA/JESD22-A114-A, rated to EIA/JESD22-A114-B. 3. Tested to EIA/JESD22-A115-A, rated to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. 5. Tested to EIA/JESD78. RECOMMENDED OPERATING CONDITIONS Symbol VCC VI VO TA t/V Supply Voltage Input Voltage Output Voltage Operating Free-Air Temperature Input Transition Rise or Fall Rate VCC = 2.5 V $0.2 V VCC = 3.0 V $0.3 V VCC = 5.0 V $0.5 V (Z or LOW State) Parameter Operating Data Retention Only Min 1.65 1.5 0 0 -55 0 0 0 Max 5.5 5.5 5.5 5.5 )125 20 10 5 Unit V V V C ns/V http://onsemi.com 2 NL17SZ07 DC ELECTRICAL CHARACTERISTICS Symbol VIH VIL ILKG VOL Parameter High-Level Input Voltage Low-Level Input Voltage Z-State Output Leakage Current Low-Level Output Voltage VIN = VIL VIN = VIH VOUT = VCC or GND IOL = 100 mA IOL = 4 mA IOL = 8 mA IOL = 12 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA IIN IOFF ICC ICCT Input Leakage Current Power Off-Output Leakage Current Quiescent Supply Current Quiescent Supply Current VIN or VOUT = VCC or GND VOUT = 5.5 V VIN = VCC or GND VIN = 3.0 V Condition VCC (V) 1.65 to 1.95 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 2.3 to 5.5 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 0 to 5.5 0 5.5 3.6 0.0 0.08 0.20 0.22 0.28 0.38 0.42 TA = 25C Min 0.7 VCC 0.7 VCC 0.3 VCC 0.3 VCC $5.0 0.1 0.24 0.3 0.4 0.4 0.55 0.55 $0.1 1 1 10 Typ Max *55C TA 125C Min 0.7 VCC 0.7 VCC 0.3VCC 0.3 VCC $10.0 0.1 0.24 0.3 0.4 0.4 0.55 0.55 $1.0 10 10 100 mA mA mA mA Max Unit V V mA V IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I II I I II I I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I II I I II I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I I I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII I I II I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII TA = 25C Typ 5.3 3.7 2.9 2.3 5.3 2.8 2.1 1.4 *55C TA 125C Min 0.8 1.2 0.8 0.5 0.8 1.2 0.8 0.5 Max 12.0 6.4 4.8 3.9 Symbol Parameter Condition VCC (V) Min 0.8 1.2 0.8 0.5 0.8 1.2 0.8 0.5 Max 11.6 5.8 4.4 3.5 Unit ns tPZL Propagation Delay (Figure 3 and 4) (Fi d RL = R1= 500 W, CL = 50 pF 1.8 $ 0.15 2.5 $ 0.2 3.3 $ 0.3 5.0 $ 0.5 tPLZ Propagation Delay (Figure 3 and 4) (Fi d RL = R1= 500 W, CL = 50 pF 1.8 $ 0.15 2.5 $ 0.2 3.3 $ 0.3 5.0 $ 0.5 11.6 5.8 4.4 3.5 1.20 6.4 4.8 3.9 ns AC ELECTRICAL CHARACTERISTICS tR = tF = 2.5 ns; CL = 50 pF; RL = 500 W CAPACITIVE CHARACTERISTICS Symbol CIN COUT CPD Input Capacitance Output Capacitance Parameter Condition Typical u2.5 4.0 4.0 Unit pF pF pF VCC = 5.5 V, VI = 0 V or VCC VCC = 5.5 V, VI = 0 V or VCC 10 MHz, VCC = 5.5 V, VI = 0 V or VCC Power Dissipation Capacitance (Note 6) 6. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin ) ICC. CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin ) ICC VCC. http://onsemi.com 3 NL17SZ07 A 50% tPZL Y 50% VCC tPLZ VCC GND HIGH IMPEDANCE VOL )0.3 V Figure 3. Switching Waveforms VCC R1 DUT RT CL RL VCC 2 PULSE GENERATOR RT = ZOUT of pulse generator (typically 50 ) Figure 4. Test Circuit DEVICE ORDERING INFORMATION Device NL17SZ07DFT2 NL17SZ07DFT2G NL17SZ07XV5T2 NL17SZ07XV5T2G Package SOT-353/SC70-5/SC-88A SOT-353/SC70-5/SC-88A (Pb-Free) SOT-553 SOT-553 (Pb-Free) Shipping 3000 / Tape & Reel 3000 / Tape & Reel 4000 / Tape & Reel 4000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 4 NL17SZ07 PACKAGE DIMENSIONS SC-88A, SOT-353, SC-70 CASE 419A-02 ISSUE J A G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A-01 OBSOLETE. NEW STANDARD 419A-02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. DIM A B C D G H J K N S INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --- 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --- 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 5 4 S 1 2 3 -B- D 5 PL 0.2 (0.008) M B M N J C H K SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 NL17SZ07 PACKAGE DIMENSIONS SOT-553, 5 LEAD CASE 463B-01 ISSUE B D -X- 5 4 A L 1 2 3 E -Y- b NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. DIM A b c D E e L HE MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 MIN 0.50 0.17 0.08 1.50 1.10 INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MIN 0.020 0.007 0.003 0.059 0.043 MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067 HE e 5 PL M c XY 0.08 (0.003) SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 NL17SZ07/D |
Price & Availability of NL17SZ07DFT2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |